Vice Grip Garage Pontiac GTO Project: New Fuel & Brake System (First Drive!) Part 3

Derek from Vice Grip Garage has been working hard on cars and trucks of all kinds this year, but this one here is pretty special for a variety of reasons. First off, it’s a 1967 GTO that has been sitting in a garage for WAY too long. Second, the owner is a Veteran who deserves some help in making this one a runner again. So who better to take it, make it run, and then clean it up so that the owner can actually enjoy it. We approve completely and know you will too.

Check out the video below and let us know what you think of Part 3 here.

CLICK HERE IF YOU MISSED THE PREVIOUS EPISODES

Video Description:

The Veteran owned GTO FINALLY hits the road in part 3. First, Derek’s got to tackle the fuel and brake system.

The post Vice Grip Garage Pontiac GTO Project: New Fuel & Brake System (First Drive!) Part 3 appeared first on BangShift.com.


https://ift.tt/fGTuFBW
from BangShift.com https://ift.tt/pMkGubj

Comments

Post a Comment

Popular posts from this blog

Corvettes With BILLET Diesel Cummins Engines? Now These Are Some Bad Ass Beasts!

Image
As if a billet Cummins wasn’t enough to talk about, no matter what it’s in, these two are in a pair of badass C2 Corvettes! Just a couple of years ago it was almost unheard of to find a car with a diesel engine in it at the race track. Sure there were a handful spread out around the country, but overall they were still being put into trucks. When a couple of the cars started working and being specifically set up to handle all the torque from these insane diesel builds, people started really paying attention. When they started showing up at events that were NOT specifically diesel races, people REALLY started paying attention. Here are a couple of ProMod style Vettes that the boys at 1320Video caught up with and you are going to want to check them out. Video Discription: While we were down at The Ultimate Callout Challenge we found a beautiful, white, diesel, promod Corvette and couldn’t keep our cameras off it! Shortly after we find out there’s a second one! It was absolutely insane...
Read more

HOW TO MAKE HP WITH YOUR JUNKYARD 4.8L LS! CHEAP 4.8L POWER MODS. CARB VS EFI, SINGLE VS DUAL PLANE

Image
Have you bought a cheap junkyard 4.8L LS and are now wondering how to add more power without working too hard? Are you asking yourself which intake to run with a carburetor? Or if you should stick with fuel injection? And how about some nitrous? In this video, Richard is going to test all those things and bring you along for all the results. Check it out and let us know what you think. Video Description: CHEAP, JUNKYARD 4.8L POWER MODS. WHAT CAM SHOULD I RUN IN MY 4.8L? CAN I MAKE 500 HP WITH MY 4.8L? CAN I RUN NITROUS ON MY 4.8L? SHOULD I RUN A BIG CAM ON MY 4.8L? WHICH INTAKE SHOULD I PICK FOR MY 4.8L? WILL A SINGLE PLANE MAKE MORE POWER THAN A DUAL PLANE ON A CARBURETED LS? WILL A CARB MAKE MORE POWER THAN EFI? CHECK OUT THIS VIDEO WHERE I RAN A STOCK 4.8L ON THE DYNO, THEN ADDED A MILD CAM AND NITROUS TO THE EFI COMBO. I THEN COMPARED THE EFI INTAKE TO CARBURETED INTAKE. I ALSO COMPARED A SINGLE PLANE TO A DUAL PLANE CARBURETED INTAKE ON THE LITTLE 4.8L! The post HOW TO MAKE H...
Read more

Cool Animation: Take A Look At This Comprehensive Layout Of The Triple Expansion Steam Engines On The Titanic

Image
One of my sons is into the Titanic disaster these days and he has been scarfing up books and stories about the ship and the icy end that befell it. One of the things we have been working through are the engines that powered the behemoth through the water. These massive steam engines were of the triple expansion type and what that means is that they used the same steam three times in three consecutive cylinders. Each cylinder different from the one before to harness as much energy as possible from the ever cooling steam. He was interested in the idea of the steam engine using a condenser in order to effectively create a “closed loop” system for the water being used in the boilers. This animation is a great tool for anyone who is interested in seeing a pretty comprehensive and easy to understand walk through on how steam engines work. While amazingly simple in theory, lots and lots of things have to be in order to make a beast like this actually work and work reliably. If you have ever...
Read more