Expensive Dyno Video: Watch This Hot Farm Pulling Tractor Engine Fire A Rod Through The Block During A Pull

This is one of those situations that can be viewed a couple of different ways. Listen, none of those ways is that great but you can take this situation, you know, the one where your big pulling tractor engine literally barfs a rod through the block down a few paths. You can freak out and blame the engine builder, which is all good, unless you are the engine builder. You can look at it like it was an inevitability and the fact that it happened on the dyno and not after the engine was loaded in the tractor, hauled to a pull, and prepared to hook, or you can silently load up your mangled engine and drink until your eyes bleed. That’s the big three that we can consider.

When we are talking about Hot Farm class pulling, the tractors have to keep their factory look to them, meaning the sheetmetal and frame have to be stock appearing. The engines have to use a factory head and a factory block and are limited to around 600ci. (Some of these rules do vary from organization to organization). Diesel is the only fuel, the engine has to have a stock appearing intake manifold and exhaust manifold and the engines are allowed a single turbo. Said single turbo is usually around 76mm on paper and then there is all kinds of wizardry happening inside of it. But long story short, these are stock style engines that are hot rodded to within an inch of their lives, or in this case, 100hp too much!

The way that this thing starts to sound when loaded down is kind of sickening and then POP…here comes the rod. Doh!

Press play below to see this hot rodded diesel engine literally spit the bit on the dyno –

The post Expensive Dyno Video: Watch This Hot Farm Pulling Tractor Engine Fire A Rod Through The Block During A Pull appeared first on BangShift.com.


https://ift.tt/fSsD9V1
from BangShift.com https://ift.tt/Z8zCHtn

Comments

Post a Comment

Popular posts from this blog

Tre5 Customs OBS Chevy Feature: Red On Red On Red On Red…

Image
This cool truck feature from Tre5 Customs is an OBS that just about everyone can relate to. Yes, the fit and finish is high level, the chassis is rad, and the LS swap is on point, but overall this truck is still identifiable as an OBS, with only one body modification! It still has door handles, features some sport mirrors, and other than a welded in roll pan out back doesn’t have any body mods. It’s just as the general intended, only smoother and prettier. Check out the details in the video below. As we’ve said before, the guys at Tre5 build some pretty cool trucks, and I always like watching their feature videos that come along when a project is ready to get delivered to the owner. These aren’t super sexy videos that make you ooh and aah over the truck but never actually tell you what is in it and under it, these are videos that really show you the cool stuff that went into these builds! We’re talking about the details and info that real enthusiasts want. And while these trucks are t
Read more

Check Out This 6×6 Engesa EE-25 Army Truck And It’s Freaky Boomerang Rear Suspension In Action

Image
Army trucks, we love them. Why? Well for the same reason we love functional hot rods that are lacking in amenities but are heavy in ass kicking ability. No matter the country of origin you are typically not going to find a lot of cushy stuff in an army truck, especially a large one. They are loaded full of ability, though and that’s exactly what caught our eye when it comes to this Brazilian 6×6 Engesa EE-25 and its awesome Boomerang rear axle. The truck uses a walking beam style layout but it can articulate in some incredible ways to keep the rears planted while the rest of the chassis rises to some pretty steel angles. Quoting a story on the rear suspension: The suspension of the EE-25 utilizes live axles and leaf springs, the rear suspension having a conspicuous “Engasa Boomerang” walking beam, a feature seen on several other Engesa 6-wheeled military vehicles. This suspension articulates, allowing the EE-25 to traverse large undulations with greatly increased traction, handling,
Read more

FAST LSXR INTAKE TEST-IS IT WORTH $1000? HOW MUCH HP DOES IT ADD? LSXR VS CHEAP, JUNKYARD TRUCK INTAKE

Image
One thing that sucks about modern EFI engines like the LS, LT, Mod Motors, And HEMIs is that aftermarket intake manifolds for them tend to be really expensive. It’s understandable as there is a lot of technology going on in there and the manufacturing is way different than the typical cast aluminum intake manifold. Some of these intakes cost around $600 but some are closer to $1,500. The question is whether or not they are worth it. In truth, we know they work, and work well, but whether it is worth the money or not is going to be up to you. In this test video from Richard Holdener, who has tested more LS intake manifolds than anyone on earth, he’ll show the real results of testing this hopped-up 5.3 with a stock truck intake and a FAST LSXr. Video Description: LOW-BUCK, CHEAP, JUNKYARD TRUCK INTAKE VS BIG BUCKS FAST LSXR! HOW MUCH POWER IS THE FAST LSXR INTAKE WORTH ON MY LS? SHOULD I BUY IT FOR MY STOCK 4.8L OR 5.3L? FAST VS TRUCK INTAKE-WHO WINS? HOW MUCH POWER IS THE INTAKE UPGRA
Read more