Spray and Pray: This In-Depth Look At Using Spray Welding To Repair A Large Worn Shaft Is Awesome

Videos like this make me happy. Why? Because they show someone who is truly capable, talented, and able to right the wrongs that sometimes happen with machines. In this case it is the repair of a large shaft used in some sort of industrial pumping program.

A bearing chewed up the shaft pretty good and rather than replace it with another massively expensive one, the decision was made to have it fixed. The method the machinist will use to fix this is spray welding and it’s fascinating.

Between the methodology of actually spray welding and all the prep before and after to make sure the work is done correctly and with the longest lasting positive effect, we love this video. Not a short watch, you can bust it into pieces if you want to. It’s not some droning boring thing, either. It’s long because the process and the execution of it has many steps and we get to see them all.

If you love technology, repair, talented people with the right tools, and fun gearhead stuff you should watch this. Legit educational entertainment!

Press play below to see this awesome video on spray welding and machining –

The post Spray and Pray: This In-Depth Look At Using Spray Welding To Repair A Large Worn Shaft Is Awesome appeared first on BangShift.com.


https://ift.tt/KAVxdj5
from BangShift.com https://ift.tt/j1RM2nU

Comments

Post a Comment

Popular posts from this blog

Tre5 Customs OBS Chevy Feature: Red On Red On Red On Red…

Image
This cool truck feature from Tre5 Customs is an OBS that just about everyone can relate to. Yes, the fit and finish is high level, the chassis is rad, and the LS swap is on point, but overall this truck is still identifiable as an OBS, with only one body modification! It still has door handles, features some sport mirrors, and other than a welded in roll pan out back doesn’t have any body mods. It’s just as the general intended, only smoother and prettier. Check out the details in the video below. As we’ve said before, the guys at Tre5 build some pretty cool trucks, and I always like watching their feature videos that come along when a project is ready to get delivered to the owner. These aren’t super sexy videos that make you ooh and aah over the truck but never actually tell you what is in it and under it, these are videos that really show you the cool stuff that went into these builds! We’re talking about the details and info that real enthusiasts want. And while these trucks are t
Read more

Check Out This 6×6 Engesa EE-25 Army Truck And It’s Freaky Boomerang Rear Suspension In Action

Image
Army trucks, we love them. Why? Well for the same reason we love functional hot rods that are lacking in amenities but are heavy in ass kicking ability. No matter the country of origin you are typically not going to find a lot of cushy stuff in an army truck, especially a large one. They are loaded full of ability, though and that’s exactly what caught our eye when it comes to this Brazilian 6×6 Engesa EE-25 and its awesome Boomerang rear axle. The truck uses a walking beam style layout but it can articulate in some incredible ways to keep the rears planted while the rest of the chassis rises to some pretty steel angles. Quoting a story on the rear suspension: The suspension of the EE-25 utilizes live axles and leaf springs, the rear suspension having a conspicuous “Engasa Boomerang” walking beam, a feature seen on several other Engesa 6-wheeled military vehicles. This suspension articulates, allowing the EE-25 to traverse large undulations with greatly increased traction, handling,
Read more

FAST LSXR INTAKE TEST-IS IT WORTH $1000? HOW MUCH HP DOES IT ADD? LSXR VS CHEAP, JUNKYARD TRUCK INTAKE

Image
One thing that sucks about modern EFI engines like the LS, LT, Mod Motors, And HEMIs is that aftermarket intake manifolds for them tend to be really expensive. It’s understandable as there is a lot of technology going on in there and the manufacturing is way different than the typical cast aluminum intake manifold. Some of these intakes cost around $600 but some are closer to $1,500. The question is whether or not they are worth it. In truth, we know they work, and work well, but whether it is worth the money or not is going to be up to you. In this test video from Richard Holdener, who has tested more LS intake manifolds than anyone on earth, he’ll show the real results of testing this hopped-up 5.3 with a stock truck intake and a FAST LSXr. Video Description: LOW-BUCK, CHEAP, JUNKYARD TRUCK INTAKE VS BIG BUCKS FAST LSXR! HOW MUCH POWER IS THE FAST LSXR INTAKE WORTH ON MY LS? SHOULD I BUY IT FOR MY STOCK 4.8L OR 5.3L? FAST VS TRUCK INTAKE-WHO WINS? HOW MUCH POWER IS THE INTAKE UPGRA
Read more