Part 2: Iron Trap Blown Flathead Powered Jalopy Shop Truck Build

Here is the second segment in the shop truck build and it really is starting to look like something. The axles are going together, which is taking some work since this thing is being built from extra parts they have laying around, and more. I am excited to see this project come together. Check it out.

The more I watch Iron Trap videos the more I want to build a 1920-1940 hot rod. They seem so simple and bare-bones if you want them to be and that means that you can put one together pretty quickly if you have the right parts and pieces laying around. Since the Iron Trap gang does, this cool shop truck project should be pretty simple and straight forward for them to get up and running. It’s especially nice since it is going to be a shop truck and not something that has to be super clean and finished when done.

That doesn’t mean it won’t be cool though! Check out video one of this project. There is more to come and you’ll dig it.

CLICK HERE IF YOU MISSED PART 1 OF THE BUILD

Video Description:

With the old frame rolled out of the shop, it’s time to build the front and rear suspension. For the front Matt pulls a drop axle off the wall and gets a set of round back spindles set up with new king pin bushing. With the steering arms heated and bent, Matt gets bungs welded into the wishbones to get them set up as split bones. The rear axle will eventually get a shortened torque tube and drive shaft, but until the engine and trans is installed it wont be needed. We love the way the RPU looks with the new suspension under it, and we can’t wait to install the blown flathead!!

The post Part 2: Iron Trap Blown Flathead Powered Jalopy Shop Truck Build appeared first on BangShift.com.


https://ift.tt/O01TwSq
from BangShift.com https://ift.tt/PY6aDhX

Comments

Post a Comment

Popular posts from this blog

Tre5 Customs OBS Chevy Feature: Red On Red On Red On Red…

Image
This cool truck feature from Tre5 Customs is an OBS that just about everyone can relate to. Yes, the fit and finish is high level, the chassis is rad, and the LS swap is on point, but overall this truck is still identifiable as an OBS, with only one body modification! It still has door handles, features some sport mirrors, and other than a welded in roll pan out back doesn’t have any body mods. It’s just as the general intended, only smoother and prettier. Check out the details in the video below. As we’ve said before, the guys at Tre5 build some pretty cool trucks, and I always like watching their feature videos that come along when a project is ready to get delivered to the owner. These aren’t super sexy videos that make you ooh and aah over the truck but never actually tell you what is in it and under it, these are videos that really show you the cool stuff that went into these builds! We’re talking about the details and info that real enthusiasts want. And while these trucks are t
Read more

Check Out This 6×6 Engesa EE-25 Army Truck And It’s Freaky Boomerang Rear Suspension In Action

Image
Army trucks, we love them. Why? Well for the same reason we love functional hot rods that are lacking in amenities but are heavy in ass kicking ability. No matter the country of origin you are typically not going to find a lot of cushy stuff in an army truck, especially a large one. They are loaded full of ability, though and that’s exactly what caught our eye when it comes to this Brazilian 6×6 Engesa EE-25 and its awesome Boomerang rear axle. The truck uses a walking beam style layout but it can articulate in some incredible ways to keep the rears planted while the rest of the chassis rises to some pretty steel angles. Quoting a story on the rear suspension: The suspension of the EE-25 utilizes live axles and leaf springs, the rear suspension having a conspicuous “Engasa Boomerang” walking beam, a feature seen on several other Engesa 6-wheeled military vehicles. This suspension articulates, allowing the EE-25 to traverse large undulations with greatly increased traction, handling,
Read more

FAST LSXR INTAKE TEST-IS IT WORTH $1000? HOW MUCH HP DOES IT ADD? LSXR VS CHEAP, JUNKYARD TRUCK INTAKE

Image
One thing that sucks about modern EFI engines like the LS, LT, Mod Motors, And HEMIs is that aftermarket intake manifolds for them tend to be really expensive. It’s understandable as there is a lot of technology going on in there and the manufacturing is way different than the typical cast aluminum intake manifold. Some of these intakes cost around $600 but some are closer to $1,500. The question is whether or not they are worth it. In truth, we know they work, and work well, but whether it is worth the money or not is going to be up to you. In this test video from Richard Holdener, who has tested more LS intake manifolds than anyone on earth, he’ll show the real results of testing this hopped-up 5.3 with a stock truck intake and a FAST LSXr. Video Description: LOW-BUCK, CHEAP, JUNKYARD TRUCK INTAKE VS BIG BUCKS FAST LSXR! HOW MUCH POWER IS THE FAST LSXR INTAKE WORTH ON MY LS? SHOULD I BUY IT FOR MY STOCK 4.8L OR 5.3L? FAST VS TRUCK INTAKE-WHO WINS? HOW MUCH POWER IS THE INTAKE UPGRA
Read more