Sometimes Mild Is Wild: This Little Holden 308 Is a Tough Stock Looking Customer!

Call it an Iron Lion, a Holden 308, or a little sleeper small block, but just don’t call it boring. We truly dig this little engine build and its performance on the dyno for the fact that it illustrates the fact that there’s still a lot of fun and satisfaction in taking the simple road and that four digit horsepower isn’t necessary to have a cool engine.

The engine in question here is a Holden 308 with factory heads that have been freshened and touched up, a new camshaft, stock intake, and a Quadra-Jet on top. The fact that by the time the testing and tweaking are done the little sucker is making more than 340hp at 6,000 RPM and 363 lb-ft of torque at 3,900 is fun to us.

Why build the engine like this? When you see the car it is going into you’ll understand. The machine has been concours restored and the owner wanted the carpet to match the drapes so to speak. It would have not suited his purpose to have some aluminum headed, single plane intake equipped or fuel injected version of the engine in a car that is supposed to carry all of its factory character.

This is old school stuff. Timing, metering rods, and finding the ideal tune for the combo. No, it is not massive horsepower but it is good horsepower!

Press play to see this neat little engine make good power with stock parts!

The post Sometimes Mild Is Wild: This Little Holden 308 Is a Tough Stock Looking Customer! appeared first on BangShift.com.


https://ift.tt/eA8V8J
from BangShift.com https://ift.tt/32JR7EO

Comments

Post a Comment

Popular posts from this blog

Tre5 Customs OBS Chevy Feature: Red On Red On Red On Red…

Image
This cool truck feature from Tre5 Customs is an OBS that just about everyone can relate to. Yes, the fit and finish is high level, the chassis is rad, and the LS swap is on point, but overall this truck is still identifiable as an OBS, with only one body modification! It still has door handles, features some sport mirrors, and other than a welded in roll pan out back doesn’t have any body mods. It’s just as the general intended, only smoother and prettier. Check out the details in the video below. As we’ve said before, the guys at Tre5 build some pretty cool trucks, and I always like watching their feature videos that come along when a project is ready to get delivered to the owner. These aren’t super sexy videos that make you ooh and aah over the truck but never actually tell you what is in it and under it, these are videos that really show you the cool stuff that went into these builds! We’re talking about the details and info that real enthusiasts want. And while these trucks are t
Read more

Check Out This 6×6 Engesa EE-25 Army Truck And It’s Freaky Boomerang Rear Suspension In Action

Image
Army trucks, we love them. Why? Well for the same reason we love functional hot rods that are lacking in amenities but are heavy in ass kicking ability. No matter the country of origin you are typically not going to find a lot of cushy stuff in an army truck, especially a large one. They are loaded full of ability, though and that’s exactly what caught our eye when it comes to this Brazilian 6×6 Engesa EE-25 and its awesome Boomerang rear axle. The truck uses a walking beam style layout but it can articulate in some incredible ways to keep the rears planted while the rest of the chassis rises to some pretty steel angles. Quoting a story on the rear suspension: The suspension of the EE-25 utilizes live axles and leaf springs, the rear suspension having a conspicuous “Engasa Boomerang” walking beam, a feature seen on several other Engesa 6-wheeled military vehicles. This suspension articulates, allowing the EE-25 to traverse large undulations with greatly increased traction, handling,
Read more

FAST LSXR INTAKE TEST-IS IT WORTH $1000? HOW MUCH HP DOES IT ADD? LSXR VS CHEAP, JUNKYARD TRUCK INTAKE

Image
One thing that sucks about modern EFI engines like the LS, LT, Mod Motors, And HEMIs is that aftermarket intake manifolds for them tend to be really expensive. It’s understandable as there is a lot of technology going on in there and the manufacturing is way different than the typical cast aluminum intake manifold. Some of these intakes cost around $600 but some are closer to $1,500. The question is whether or not they are worth it. In truth, we know they work, and work well, but whether it is worth the money or not is going to be up to you. In this test video from Richard Holdener, who has tested more LS intake manifolds than anyone on earth, he’ll show the real results of testing this hopped-up 5.3 with a stock truck intake and a FAST LSXr. Video Description: LOW-BUCK, CHEAP, JUNKYARD TRUCK INTAKE VS BIG BUCKS FAST LSXR! HOW MUCH POWER IS THE FAST LSXR INTAKE WORTH ON MY LS? SHOULD I BUY IT FOR MY STOCK 4.8L OR 5.3L? FAST VS TRUCK INTAKE-WHO WINS? HOW MUCH POWER IS THE INTAKE UPGRA
Read more